Cold Work Tool Steel
N2360M
Recommended in manufacturing high-performance shear blades used in pulp, paper and hardboard plants. Also suitable in manufacturing flat or round cutters to operate with sheets up to 15mm thick.
- ABTN | ASTM | SAE | AISI: –
- DIN | WNr: –
- Hardness (HRc): 45 – 57
- Chemical composition:
| C % | Mn % | Cr % | Mo % | V % | OTHERS % |
| 0,52 | 0,40 | 8,00 | 1,50 | 0,45 | Si=0,90 |
VA2
Tools that require high wear resistance, such as dies for pressing, minting and drawing, thread rolling mills, lathe beds, punches and gauges.
- ABTN | ASTM | SAE | AISI: A2
- DIN | WNr: 1.2363
- Hardness (HRc): 53 – 58
- Chemical composition:
| C % | Mn % | Cr % | Mo % | V % | OTHERS % |
| 0,96 | 0,60 | 4,90 | 0,92 | 0,17 | Si=0,30 |
VD2
Specially used in tools that require high abrasion resistance, such as dies for pressing and minting; thread rolling; drawing; lathe beds; punches; gauges.
- ABTN | ASTM | SAE | AISI: D2
- DIN | WNr: 1.2379
- Hardness (HRc): 56 – 60
- Chemical composition:
| C % | Mn % | Cr % | Mo % | V % |
| 1,50 | 0,35 | 12,00 | 0,78 | 0,80 |
VF800AT
Cold work steel showing high toughness and wear resistance. Suitable for applications, such as thread rolling dies and thread rollers, minting tools and cutting and drawing dies.
- ABTN | ASTM | SAE | AISI: –
- DIN | WNr: –
- Hardness (HRc): 56 – 62
- Chemical composition:
| C % | Si % | Cr % | Mo % | V % | Nb% |
| 0,85 | 0,90 | 8,40 | 2,00 | 0,50 | 0,15 |
VND
Cutting tools, especially taps, split dies, broaches, punches, paper cutters, woodworking tools; also indicated for guide pins, thread rollers, tools and dies in general, as well as measuring instruments, such as gauges, templates and scales.
- ABTN | ASTM | SAE | AISI: O1
- DIN | WNr: 1.2510
- Hardness (HRc): 56 – 60
- Chemical composition:
| C % | Mn % | Cr % | W % | V % |
| 0,95 | 1,25 | 0,50 | 0,50 | 0,12 |
VS7
High hardness and toughness steel for tools that must withstand impact and abrasion; chisels, pneumatic tools and letter punches.
- ABTN | ASTM | SAE | AISI: S7
- DIN | WNr: –
- Hardness (HRc): 54 – 58
- Chemical composition:
| C % | Mn % | Cr % | Mo % | OTHERS % |
| 0,50 | 0,70 | 3,20 | 1,40 | Si=0,35 |
VW3
High hardness and toughness steel for tools that must withstand impact and abrasion; chisels and pneumatic tools.
- ABTN | ASTM | SAE | AISI: S1
- DIN | WNr: 1.2542
- Hardness (HRc): 54 – 58
- Chemical composition:
| C % | Mn % | Cr % | Mo % | W % | V % | OTHERS % |
| 0,45 | 0,30 | 1,20 | 0,20 | 1,90 | 0,20 | Si=1,00 |